Used in many sectors for different applications. Ducted augers are mainly used inclined where there is a difference in height between the loading and discharge points. Augers with conduits are usually level with the possibility of inspecting the screw for cleaning or maintenance. They are in embossed metal plate and welded painted, they can also be requested in stainless steel and for the food sector.

The drop-through rotary valve was created for dosing and discharging the different types of dust, shavings, wood chips, industrial waste and recycled refuse, even in large sizes. It has blades in rubber or wear-resistant material, has a good seal at low-medium pressure, withstands medium-high temperatures and can work with humidity of 50%.
The valves can be used for dosing and discharging on filters and cyclones both under pressure and without pressure.
Made in embossed metal sheet, welded and powder coated, they can also be requested in AISI 304 and 316 stainless steel and for the food sector.

Many types of rigid or flexible tubing and components compatible with our products.

Most of the purification systems have three filtration stages – a pre-filter protects the High Efficiency Particulate Air, a filter for the finest particles (or micro-particles) and a filter for gas/chemical filtration.

Portable electrode maintenance furnace MOD. F5

Performance:
Max internal temp. 140-150°C
Max. temp. lower plate 200°C
Max. temp. upper plate 150°
Capacity 5 kg
Reaches 100°C in about 25 min.

Portable electrode maintenance furnace MOD. FA15

Performance:
Max internal temp. 170-180°C
Max. temp. lower plate 300°C
Max. temp. upper plate 200°C
Capacity 15 kg
Automatic thermostat adjustment on reaching selected temp.
Reaches 100°C in about 20 min.

Portable electrode maintenance furnace MOD. FAT15

Performance:
Max internal temp. 170-180°C
Max. temp. lower plate 300°C
Max. temp. upper plate 200°C
Capacity 15 kg
Integrated thermostat
Reaches 100°C in about 20 min.

Drying and electrode maintenance MOD. FE4

Performance:
Voltage 380 V
Power 2 resistors of 1700W and 2 resistors of 1300W
Adjustable thermo-regulators 0-600°
Max internal temp. 400°C
Load capacity about 300 kg. Electrode 3.25

Drying and flow maintenance furnace MOD. FF200

Performance:
Voltage 400 V
Power 2 resistors of 2200W and 1 resistor of 2300W
Adjustable thermo-regulators 0-600°

Max internal temp. 400°C
Load capacity about 200 kg

Counterflanges with bolts and gaskets to withstand high pressure.

Hardware
> LCD display 16 × 2 lines
> Keyboard with 4 keys
> Outputs to check the motors
> Input for remote start
> Input for temperature probe
> 1 PTC input to check temperature (if present)

Software
> Check on start of motors
> Motor selection option
> Hour counter with time recorder every 5 minutes
> Differential pressure switch
> RS 232 output for collection to PC
> Static outputs for management of solenoid valves

• Check on motor speed;
• Check on blockage of filters;
• Integrated hour counter;
• Output for integrated remote check;
• Management of up to 16 solenoid valves in the dust collector series.

• Automatic cleaning regulator with various operational options;
• Monitoring of filter at differential pressure with indicator for changing the filter cartridge;
• Interface for integration into the extraction system;
• Controls for connected shutters.